Salaty Synergy Sdn Bhd – Petroleum & Petrochemical (Oil & Gas) Industry Providers in Malaysia

	Select Products :



		Valves & Manifolds




		Corrosion and Erosion Monitoring



		Tubings, Pipes, Fittings & Wirelines



		Process & Analytical



		Electrical Cable and Accessories

Flow and Temperature Measurement

For over 15 years Tercom s.r.l. has been a manufacturer of dependable equipment designed for use in the oil, gas, petrochemical, pipe-line, electric central and general industry.

Orifice Flange Assemblies

For general purpose applications .Available in sizes from 2” to 40” of different types and materials depending from the fluid and process conditions.

Meter Tubes & Meter Runs

Tercom Meter Tubes are normally manufactured in sizes from 2” to 24” dia with upstream and downstream honed pipe sections for accurate flow measurement .

Venturi Tubes

Designed to provide accurate flow measurement with a minimum of permanent pressure loss, Tercom Venturi Tubes are precision machined to meet the accuracy and tolerances of the applicable Standards .

Flow Nozzles

Tercom Flow nozzles are available in sizes from 2” to 30” for a wide range of applications at medium and high pressure and temperature.

"Terflow" (Multi-Port Averaging Pitot Tubes)

For insertion in lines of any size.Simple and fast installation good accuracy and repeatability make “TerFlow” a valid alternative for large pipe sizes where use of Orifice Flanges, Venturi tubes or Flow nozzles would be unpractical or too expensive.

Multistage Pressure Reducers

Used for flow or pressure reducing when a simple Restriction Orifice is not suitable due to the high required pressure drop or noise limitations.

Thermocouples & RTD Assemblies

Manufactured for a wide range of applications and temperature according to ANSI MC 96.1 (Thermocouples ) and IEC 751 / DIN 43760 (RTD’s) Standards, with High-Purity MgO (Magnesium Dioxide) mineral insulated cables with stainless steel sheath material.

Thermowells

To allow thermocouples & RTD’s mounting a Thermowell is generally necessary to provide adequate protection of the thermoelements. Tercom thermowells are manufactured in any length with different materials from pipe or bar-stock,
with process connections threaded, welded, or flanged to meet practically any type of requirement and process condition.

Steam & Water Analysis Systems

For Power Plants the control of phisico-chemical characteristics of feed water and the generated steam is of great importance for quality and
economical reasons.

TOP

Process Instrumentation

Badotherm adds value by working with customers as a team and building a shared commitment to success to realize real and sustainable results.
Our approach sets us apart from other companies in the industry and is encapsulated in our core values.
Our mission is “to be recognized as the no 1 brand name in the world for high quality process instrumentation and solution, enabling the customers to optimize their process efficiency and reliability.”

Pressure Instrumentation

Badotherm industrial pressure gauge series are available in 5ø/63/1øø /16ø mm. The designs are complied to EN837-1/9.7.2, (formerly BS 178ø & DIN 16006), ANSI B40.1.1 , ASME B 40 .100. All Badotherm stainless steel tubes are made from seamless drawn tube

Temperature Instrumentation

Badotherm industrial series temperature gauges are available in 63/80/100/125/160 mm with stainless steel gas filled or bimetal thermometer. The gauges come in various mounting and connection. The standard connection on this thermometer is an adjustable fitting in order to give more flexibility to stem length immersion.

Chemical Seals

Badotherm range of chemical seals are specifically designed to modern chemical processing and process manufacturing which procedures demand ever greater accuracy and reliability from their pressure and level measuring instruments. Both costs and production downtime must be kept to absolute minimum.

TOP

Equipment design and manufacturing services are provided by DBR Design and Manufacturing Inc., a wholly owned subsidiary of DBR Associates Inc.., in Edmonton, Alberta, Canada. Through the cooperative efforts of researchers, equipment designers and machinists and the recognized need for specialized high pressure laboratory facilities, the unique line of high pressure equipment has emerged. This equipment is manufactured using the highest standard of precision workmanship and materials and optimized ease of operation, performance, maintenance and safety.

The Line of DBR Equipment
DBR Design & Manufacturing Inc.. enjoys a respected place in the international market place by offering its clients the most practical, accurate and reliable solutions to the problem of high pressure experimentation.

TOP

Individual Components Manufactured

	High Pressure Fluid Sample Cylinders		CCD Level Detection Equipment (Interface Detection)
	High Pressure Positive Displacement Pumps		Complete Apparatus Manufactured
	Back Pressure Regulators		Complete High Pressure Phase Behavior Apparatus
	Electromagnetic Viscometers		High Pressure Recombination Apparatus
	Pendent Drop Cells		Onset and Bulk Solids Detection System
	Constant Temperature Air Baths		Reservoir Condition Contact Angle/Interfacial Tensiometer
	Recombination Cells		High Temperature Spinning Drop Interfacial Tensiometer
	High Pressure PVT Cells		Slim Tube Miscibility Apparatus
	Magnetic Mixers		Rising Bubble Apparatus
	Sapphire Visual Cells		Formation Damage Facility
	High Pressure Sight Glass Cells		Core Flood Facility
	Flash Equilibrium Cells		High Temperature Core Steam Flooding Apparatus
	Triaxial Core Holders		Automatic Liquid Collection Device
	High Pressure Steam Generators		Gas-Oil-Ratio (GOR) Apparatus
	Gasometers		Commissioning of Complete Fluid Property Laboratories
	Pressure Intensifiers		Custom Design Equipment

Many research problems require the use of innovative methods. Recognising this necessity, DBR Design & Manufacturing Inc. offers its engineering expertise to implement modifications to existing equipment, or to custom design and build completely new concept prototypes.

As a member of the DBR Group of Companies, DBR Design & Manufacturing Inc.. has ready access to the laboratories of DBR Research Inc. These laboratories are dedicated to the performance of advanced fluid property measurements on hydrocarbon and related systems. As a result of the synergy that exists between the organizations, new equipment and techniques have been developed and tested and existing equipment has been modified and improved.

Fluid Behavior Software and Consulting

EQUI-PHASE HYDRATE V5.0 has been released
AMSIM V7.0 has been released
PVT Pro V4.0 has been released

The DBR Group of Companies (DBR) is an internationally recognized, diverse group of companies that provide quality phase behavior and fluid property technology to the petroleum and petrochemical industries. Besides laboratory services and equipment, DBR also develops and markets engineering software that is specialized in phase behavior and fluid property predictions, PVT database management and sour gas sweetening process simulations.

TOP